Menu

Company information

BUSSE Green Technologies Inc.
Ingo Schaefer
P.O. Box 1123
Oak Park, Illinois 60304
USA
phone: +1 708 204 3504
fax: +1 708 445 1304
e-mail: info@busse-gt.com

Liability note

We take care to verify all information but cannot be held responsible for the contents of the links on this site. The contents of linked sites are solely the responsibility of those site owners.
 

 

How it works

The Busse MF Small Size Sewage Treatment System is designed on the basis of DIN 4261 part 2 and is comprised of two treatment steps, pre-treatment (1) and aeration (2). At the pretreatment step, which also serves as waste water storeage, biologically degradable coarse material such as, e.g., faeces, toilet paper, are dissolved and the non-dissolving components separated from the waste water by an aerated sieve (3). A pump (4) pumps the water, from which the coarse material has been separated, to the aeration section. In this step the organic matter in the waste water is degraded biologically by microorganisms and oxygen (5). In addition to this, the waste water is treated physically by microfiltration membranes (6) (ultrafine filter with 0.4 µm pore size). These membrane filters eliminate suspended material, as well as bacteria and germs, ensuring that only totally clear, odourless, hygienically harmless water (filtrate) leaves the system.

The BusseGT has passed the certification process of NSF International Standard 40 and 245 for USA and North America in 2008. The test results show that the system elates over 95 % of the COD and over 95 % of BOD5. It has been proven during the certification process that the BusseGT system using microfiltration membranes can hold back all bacteria and viruses and therefore also meets the requirements of the Washington State Legislature Hygienic Standard. The filtrate is fit for re-use without further treatment.

 

Schematische Darstellung des Mikrofiltrationsverfahrens zur Abwasserreinigung
Diagram of the functional principle of microfiltration technology